Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › MASS AIR FLOW METER
RM3210E _51 Engine / Hybrid System _047494 2ZR-FXE ENGINE CONTROL _0241782 MASS AIR FLOW METER G

2ZR-FXE ENGINE CONTROL  MASS AIR FLOW METER  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:
·

Perform the mass air flow meter sub-assembly inspection according to the following procedure.

·

Only replace the mass air flow meter sub-assembly when the mass air flow meter sub-assembly value in the Data List (with the engine stopped) is not within the normal operating range or there is foreign matter on the mass air flow meter sub-assembly platinum hot wire (heater).



PROCEDURE

Hide 22204 1.INSPECT MASS AIR FLOW METER SUB-ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Data List / Mass Air Flow Sensor.

Powertrain > Engine > Data List
Tester Display
Mass Air Flow Sensor
50003 372 215

e.
A230347C04
0,0 0,0 false
V100135

Air


Blow air into the mass air flow meter sub-assembly and check that the value of Mass Air Flow Sensor fluctuates.

If the result is not as specified, inspect the mass air flow meter sub-assembly, wire harness and ECM.