Home › Engine / Hybrid System › 2ZR-FXE FUEL › FUEL PUMP(w/o Canister Pump Module)
RM3210E _51 Engine / Hybrid System _047496 2ZR-FXE FUEL _0241961 FUEL PUMP(w/o Canister Pump Module) A

2ZR-FXE FUEL  FUEL PUMP(w/o Canister Pump Module)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A375510C02
0.844,1.031 1.167,1.031 false 0.656,0.948 0.969,1.104 0.313,0.156 10 false *a
*a Tube


·

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

·

When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.



PROCEDURE

Hide 23220A 2.REMOVE FUEL PUMP WITH FILTER ASSEMBLY

a.
A374361

Disconnect the fuel pump harness connector.


b.
A374362

Disengage the clamp and claw, and disconnect the fuel pump filter hose from the No. 1 fuel sub-tank.


c.
A374363C01
2.896,1.802 2.563,1.802 2.563,1.802 2.229,1.198 true 2.948,1.719 3.156,1.875 0.208,0.156 10 true *a
*a Tube


Disengage the 2 claws and remove the fuel filter and fuel pump with filter assembly from the No. 1 fuel sub-tank.

NOTICE:

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>2ZR-FXE FUEL>FUEL SYSTEM>PRECAUTION



d.
A374364C02
0.802,0.792 1.313,0.792 false 0.625,0.719 0.938,0.875 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the No. 1 fuel suction support from the fuel filter.


e.
A374365C03
0.729,1.417 0.865,1.417 0.865,1.417 1,1.688 false 2.427,0.729 2.708,0.729 false 1.885,1.927 2.167,1.927 false 0.906,1.104 1.188,1.104 false 0.563,1.323 0.875,1.479 0.313,0.156 10 false *d 2.219,1.854 2.531,2.01 0.313,0.156 10 false *b 2.76,0.646 3.073,0.802 0.313,0.156 10 false *c 0.74,1.01 1.052,1.167 0.313,0.156 10 false *a
*a Fuel Filter
*b Suction Filter
*c Tube
*d Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 5 claws, and remove the fuel pump with filter assembly from the fuel filter.

NOTICE:
·

Do not damage the fuel filter or suction filter.

·

Do not remove the suction filter from the fuel pump with filter assembly.

·

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>2ZR-FXE FUEL>FUEL SYSTEM>PRECAUTION




f.
A374366

Disconnect the fuel pump harness connector to remove the fuel pump harness from the fuel pump with filter assembly.


g.
A374367C03
2.531,0.917 2.656,0.75 2.656,0.75 2.781,0.75 false 2.531,1.083 2.792,1.083 false 0.656,4.271 1,4.271 false 1.052,4.219 1.365,4.375 0.313,0.156 10 false *1 2.844,1.021 3.156,1.177 0.313,0.156 10 false *2 2.177,2.104 2.49,2.26 0.313,0.156 10 false *a 2.854,0.698 3.167,0.854 0.313,0.156 10 false *1 2.219,2.646 2.531,2.802 0.313,0.156 10 false *a
*1 O-ring
*2 Fuel Pump Spacer
*a 5.0 mm (0.197 in.)


Remove the O-ring and fuel pump spacer from the fuel pump with filter assembly.

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm (0.0394 in.) diameter) that is formed as shown in the illustration.