Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0234844 REAR SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the rear 3 point type seat outer belt assembly.


PROCEDURE

Hide 73360 1.INSPECT REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)

a.

Visually check for defects with the rear 3 point type seat outer belt assembly installed to the vehicle.

i.

The defects to be checked are as follows:

·

Cuts on the rear 3 point type seat outer belt assembly

·

Small cracks on the rear 3 point type seat outer belt assembly

·

Significant discoloration on the rear 3 point type seat outer belt assembly


OK:

No defects are found.


HINT:

If any defects are found, replace the rear 3 point type seat outer belt assembly with a new one.




Hide 73360 2.INSPECT REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)

a.

Visually check for defects with the rear 3 point type seat outer belt assembly removed from the vehicle.

i.

The defects to be checked are as follows:

·

Cuts on the rear 3 point type seat outer belt assembly

·

Small cracks on the rear 3 point type seat outer belt assembly

·

Significant discoloration on the rear 3 point type seat outer belt assembly

·

Cracks or other damage on the connector


OK:

No defects are found.


HINT:

If any defects are found, replace the rear 3 point type seat outer belt assembly with a new one.