Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0234844 REAR SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73360 1.INSPECT REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY

a.
B431680C01
0.385,1.01 0.719,1.313 0.333,0.302 10 false *a 1.448,2.833 1.76,3.115 0.313,0.281 10 false *b 0.667,2 0.938,2.281 0.271,0.281 10 false *c
*a Retractor
*b Unlock
*c Lock
*d 45°


Before installing the rear 3 point type seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear 3 point type seat outer belt assembly.