Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0234845 REAR CENTER SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73350C 1.INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY

a.
B431681C01
1.75,2.771 1.833,3 1.833,3 2,3 false 2.083,2.917 2.396,3.115 0.313,0.198 10 false *a 2.875,1.083 3.188,1.281 0.313,0.198 10 false *f 2.51,0.677 2.823,0.875 0.313,0.198 10 false *b 1.844,0.448 2.156,0.646 0.313,0.198 10 false *c 1.594,0.667 1.906,0.865 0.313,0.198 10 false *e 1.313,0.49 1.625,0.688 0.313,0.198 10 false *d 0.667,1.031 0.979,1.229 0.313,0.198 10 false *f
*a Retractor
*b 0°
*c 27°
*d 37°
*e Unlock
*f Lock


Before installing the rear center seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is between 27° and 37°, check that the belt can be pulled from the retractor. When the inclination of the retractor is less 27° or more than 37°, check that the belt locks.

If the result is not as specified, replace the rear center seat outer belt assembly.