Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH
RM3210E _59 Vehicle Exterior _047514 WIPER / WASHER _0242030 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


PROCEDURE

Hide 84650 1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E337470C01
2.75,1.208 2.885,1.208 false
V113147

Install in this Direction


Engage the claw as shown in the illustration to install the windshield wiper switch assembly.


b.

Connect the 2 connectors.


Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

a.

Engage the 4 clips and 2 claws to connect the upper steering column cover to the lower instrument cover sub-assembly.


b.
E337467C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw to install the upper steering column cover as shown in the illustration.


Hide 45024 3.INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY

NOTICE:

If the lower steering column cover sub-assembly is installed in the incorrect order, the parts may break.


a.
E337464C01
1.896,1.802 1.969,1.906 false
V113147

Install in this Direction


Engage the 3 claws as shown in the illustration.


b.
E337460

Engage the 2 claws.


c.

Turn the steering wheel assembly to the left and install the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


d.

Turn the steering wheel assembly to the right and install the lower steering column cover sub-assembly with the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)