Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM3210E _59 Vehicle Exterior _047514 WIPER / WASHER _0242032 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


PROCEDURE

Hide 85310 1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
E337184C02
1.115,1.781 1.229,1.729 false
V113147

Install in this Direction


Install the washer motor and pump assembly as shown in the illustration.


b.

Connect the connector.


c.

Connect the washer hose.


Hide 2.ADD WASHER FLUID

a.

Connect the rear washer hose.


b.

Add washer fluid to the washer jar.


Hide 53875A 3.INSTALL FRONT FENDER LINER RH

a.

Temporarily install the front fender liner RH with the 9 clips.


b.

for Rough Road Area Specification Vehicles:

i.

Install the clip.



c.
E337179C01
2.156,0.333 2.469,0.49 0.313,0.156 10 false *a 2.823,0.333 3.135,0.49 0.313,0.156 10 false *b
*a Correct
*b Incorrect


Install the 2 pin hold clips as shown in the illustration.

NOTICE:

Insert each pin hold clip with the slot aligned vertically. Do not rotate the pin hold clip after inserting it. After installation, confirm that the slot is aligned vertically.



d.

Install the front fender liner RH with the grommet and 8 screws.


Hide 4.INSTALL FRONT WHEEL RH