Home › Vehicle Interior › INTERIOR PANELS / TRIM › UPPER INSTRUMENT PANEL
RM3210E _58 Vehicle Interior _047504 INTERIOR PANELS / TRIM _0242034 UPPER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  UPPER INSTRUMENT PANEL  REASSEMBLY  


PROCEDURE

Hide 55349A 1.INSTALL INSTRUMENT PANEL CUSHION

a.

Clean the upper instrument panel assembly surface.

i.

Remove the double-sided tape from the upper instrument panel assembly.


ii.

Wipe off any tape adhesive residue.



b.

Remove the release paper from a new instrument panel cushion.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



c.
B432279C01
0.396,0.573 0.573,0.688 true 2.719,1.052 2.958,0.906 true 0.177,0.458 0.427,0.635 0.25,0.177 10 true *a 3,0.792 3.25,0.969 0.25,0.177 10 true *a
*a Marking Line


Align the ends of the instrument panel cushion with the marking lines on the upper instrument panel assembly and install the instrument panel cushion as shown in the illustration.


Hide 55539 2.INSTALL SPARE SWITCH HOLE COVER (for RHD)

a.
B432275

Engage the 2 claws to install the spare switch hole cover.


Hide 82142 3.INSTALL NO. 2 INSTRUMENT PANEL WIRE

a.
B432274

Engage the 10 clamps to install the No. 2 instrument panel wire.


Hide 55961A 4.INSTALL SIDE DEFROSTER NOZZLE RH

a.
B432271

Engage the 3 claws to install the side defroster nozzle RH.


Hide 55970B 5.INSTALL SIDE DEFROSTER NOZZLE ASSEMBLY RH

a.
B432269

Engage the 2 guides.


b.

Install the side defroster nozzle assembly RH with the 2 screws <A>.


Hide 55962B 6.INSTALL SIDE DEFROSTER NOZZLE LH

a.
B432272

Engage the 3 claws to install the side defroster nozzle LH.


Hide 55980B 7.INSTALL SIDE DEFROSTER NOZZLE ASSEMBLY LH

a.
B432270

Engage the 2 guides.


b.

Install the side defroster nozzle assembly LH with the 2 screws <A>.


Hide 86101H 8.INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Navigation Antenna)

Hide 9.INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (w/ Navigation Antenna)

Hide 89120A 10.INSTALL AUTOMATIC LIGHT CONTROL SENSOR

Hide 55950G 11.INSTALL DEFROSTER NOZZLE ASSEMBLY

a.
B432268

Engage the 9 guides.


b.

Install the defroster nozzle assembly with the 3 screws <A>.


Hide 55328 12.INSTALL NO. 1 INSTRUMENT PANEL PIN

a.
B432266

Install the 4 No. 1 instrument panel pins with the 4 screws <A>.


Hide 13.INSTALL METER MIRROR SUB-ASSEMBLY (w/ Headup Display)