899A0A
1.INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
|
Install in this Direction |
Engage the clamp to install the No. 2 indoor electrical key antenna assembly as shown in the illustration.
Be careful when installing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.
Connect the connector.
72693
2.INSTALL REAR SEAT CUSHION LOCK HOOK
3.INSTALL REAR SEAT CUSHION ASSEMBLY
73350C
4.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY