Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM3210E _55 Steering _047547 POWER ASSIST SYSTEMS _0242387 POWER STEERING SYSTEM C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  U0129  Lost Communication with Brake System Control Module  U023A  Lost Communication with Front Camera Module  U0293  Lost Communication with Hybrid Control Module  U1110  Lost Communication with Clearance Sonar Module  


DESCRIPTION

The power steering ECU assembly receives signals from the ECM, skid control ECU (brake booster with master cylinder assembly), forward recognition camera (w/ Toyota Safety Sense), hybrid vehicle control ECU, and clearance warning ECU assembly (w/ Simple Intelligent Parking Assist System) via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note
U0129 Lost Communication with Brake System Control Module Lost communication with skid control ECU (brake booster with master cylinder assembly)
·

CAN communication system

·

Skid control ECU (Brake booster with master cylinder assembly)


EPS warning light: Comes on The ECU judges the system has returned to normal or the power switch is turned on (IG) again -
U023A Lost Communication with Front Camera Module Lost communication with forward recognition camera
·

CAN communication system

·

Forward recognition camera


EPS warning light: Does not come on The ECU judges the system has returned to normal or the power switch is turned on (IG) again w/ Toyota Safety Sense
U0293 Lost Communication with Hybrid Control Module Lost communication with hybrid vehicle control ECU
·

CAN communication system

·

Hybrid vehicle control ECU


EPS warning light: Does not come on The ECU judges the system has returned to normal or the power switch is turned on (IG) again -
U1110 Lost Communication with Clearance Sonar Module Lost communication with clearance warning ECU assembly
·

CAN communication system

·

Clearance warning ECU assembly


EPS warning light: Does not come on The ECU judges the system has returned to normal or the power switch is turned on (IG) again w/ Simple Intelligent Parking Assist System

PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM

Result:
Proceed to
NEXT



NEXT

END