Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for LH Side)
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0234842 REAR SEAT INNER BELT ASSEMBLY(for LH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for LH Side)  INSPECTION  


PROCEDURE

Hide 73480 1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (FOR LH)

a.
B276694C36
1.5,0.25 1.917,0.5 0.417,0.25 0.188,0.135 0.344,0.271 0.156,0.135 10 false *a 1.583,0.302 2.042,0.5 0.458,0.198 10 false M26
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for LH))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
M26-5 (LBR+) - M26-4 (LBR-) Rear seat belt LH unfastened Below 1 Ω
Rear seat belt LH fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH (for LH).


Hide 73480 2.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (FOR CENTER)

a.
E101572C01
1.5,0.188 1.917,0.438 0.417,0.25 0.146,0.146 0.458,0.344 0.313,0.198 10 false *a 1.583,0.24 2.042,0.438 0.458,0.198 10 false M27
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for Center))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
M27-1 (CBR+) - M27-2 (CBR-) Rear seat center belt unfastened Below 1 Ω
Rear seat center belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH (for Center).