Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for RH Side)
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0234843 REAR SEAT INNER BELT ASSEMBLY(for RH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for RH Side)  INSPECTION  


PROCEDURE

Hide 73380A 1.INSPECT REAR SEAT INNER BELT ASSEMBLY RH

B276694C37
1.5,0.25 1.917,0.5 0.417,0.25 0.188,0.135 0.344,0.271 0.156,0.135 10 false *a 1.583,0.302 2.042,0.5 0.458,0.198 10 false M25
*a Component without harness connected
(Rear Seat Inner Belt Assembly RH)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
M25-5 (RBR+) - M25-4 (RBR-) Rear seat belt RH unfastened Below 1 Ω
Rear seat belt RH fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly RH.