Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA
RM3210E _56 Audio / Visual / Telematics _047512 PARK ASSIST / MONITORING _0243257 TELEVISION CAMERA A

PARK ASSIST / MONITORING  TELEVISION CAMERA  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Rear television camera assembly (w/ Parking assist monitor system) Parking assist monitor system initialization Parking assist monitor system (Click here)

PROCEDURE

Hide 76801 1.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 86790D 2.REMOVE REAR TELEVISION CAMERA ASSEMBLY

a.
E338240

Disconnect the connector.


b.
E338241

Remove the 2 screws.


c.
E338242C02
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 guides to remove the rear television camera assembly as shown in the illustration.