76887
1.INSTALL REAR SPOILER SEAL
When installing the rear spoiler seal, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler excessively.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler.
Remove the release paper from a new rear spoiler seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the rear spoiler seal as shown in the illustration.
Install the rear spoiler seal along the line on the rear spoiler.
76875
2.INSTALL NO. 4 REAR SPOILER PROTECTOR
When installing the No. 4 rear spoiler protector, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler excessively.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler.
Remove the release paper from 17 new No. 4 rear spoiler protectors.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the 17 No. 4 rear spoiler protectors as shown in the illustration.
Install each No. 4 rear spoiler protector along the line on the rear spoiler.
76874
3.INSTALL NO. 3 REAR SPOILER PROTECTOR
When installing the No. 3 rear spoiler protector, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler excessively.
|
Install in this Direction |
Install 5 new bolts as shown in the illustration.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler.
Remove the release paper from 5 new No. 3 rear spoiler protectors.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the 5 No. 3 rear spoiler protectors as shown in the illustration.
Install each No. 3 rear spoiler protector along the line on the rear spoiler.
76873
4.INSTALL NO. 2 REAR SPOILER PROTECTOR
When installing the No. 2 rear spoiler protector, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler excessively.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler.
Remove the release paper from 8 new No. 2 rear spoiler protectors.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the 8 No. 2 rear spoiler protectors as shown in the illustration.
Install each No. 2 rear spoiler protector along the line on the rear spoiler.
76872
5.INSTALL NO. 1 REAR SPOILER PROTECTOR
When installing the No. 1 rear spoiler protector, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the rear spoiler excessively.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the rear spoiler.
Remove the release paper from 2 new No. 1 rear spoiler protectors.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the 2 No. 1 rear spoiler protectors as shown in the illustration.
Install each No. 1 rear spoiler protector along the line on the rear spoiler.
81006
6.INSTALL CENTER STOP LIGHT SET