53158D
1.INSTALL NO. 5 RADIATOR GRILLE SEAL
When installing the No. 5 radiator grille seal, heat the radiator shutter using a heat light.
| Item | Temperature |
|---|---|
| Radiator Shutter | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the radiator shutter excessively.
Clean the radiator shutter surface.
Using a heat light, heat the radiator shutter surface.
Remove the double-sided tape from the radiator shutter.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the radiator shutter.
Remove the release paper from a new No. 5 radiator grille seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the No. 5 radiator grille seal as shown in the illustration.
Install a No. 5 radiator grille seal along the line on the radiator shutter.
53155G
2.INSTALL RADIATOR GRILLE SEAL
When installing the radiator grille seal, heat the radiator shutter using a heat light.
| Item | Temperature |
|---|---|
| Radiator Shutter | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the radiator shutter excessively.
Clean the radiator shutter surface.
Using a heat light, heat the radiator shutter surface.
Remove the double-sided tape from the radiator shutter.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the radiator shutter.
Remove the release paper from a new radiator grille seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *1 | No. 5 Radiator Grille Seal |
| *a | Line |
Install the radiator grille seal as shown in the illustration.
Install a radiator grille seal along the line on the radiator shutter.
53157B
3.INSTALL NO. 3 RADIATOR GRILLE SEAL
When installing the No. 3 radiator grille seal, heat the radiator shutter using a heat light.
| Item | Temperature |
|---|---|
| Radiator Shutter | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the radiator shutter excessively.
Clean the radiator shutter surface.
Using a heat light, heat the radiator shutter surface.
Remove the double-sided tape from the radiator shutter.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the radiator shutter.
Remove the release paper from a new No. 3 radiator grille seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *1 | Radiator Grille Seal |
| *a | Line |
Install the No. 3 radiator grille seal as shown in the illustration.
Install a No. 3 radiator grille seal along the line on the radiator shutter.
53158C
4.INSTALL NO. 4 RADIATOR GRILLE SEAL
When installing the No. 4 radiator grille seal, heat the radiator shutter using a heat light.
| Item | Temperature |
|---|---|
| Radiator Shutter | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the radiator shutter excessively.
Clean the radiator shutter surface.
Using a heat light, heat the radiator shutter surface.
Remove the double-sided tape from the radiator shutter.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the radiator shutter.
Remove the release paper from a new No. 4 radiator grille seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Edge of Radiator Shutter Surface |
Install the No. 4 radiator grille seal as shown in the illustration.
Install a No. 4 radiator grille seal along the edge of radiator shutter surface.
53159F
5.INSTALL NO. 6 RADIATOR GRILLE SEAL
When installing the No. 6 radiator grille seal, heat the radiator shutter using a heat light.
| Item | Temperature |
|---|---|
| Radiator Shutter | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the radiator shutter excessively.
Clean the radiator shutter surface.
Using a heat light, heat the radiator shutter surface.
Remove the double-sided tape from the radiator shutter.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the radiator shutter.
Remove the release paper from a new No. 6 radiator grille seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the No. 6 radiator grille seal as shown in the illustration.
Install a No. 6 radiator grille seal along the line on the radiator shutter.
53156F
6.INSTALL NO. 2 RADIATOR GRILLE SEAL
When installing the No. 2 radiator grille seal, heat the radiator shutter using a heat light.
| Item | Temperature |
|---|---|
| Radiator Shutter | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the radiator shutter excessively.
Clean the radiator shutter surface.
Using a heat light, heat the radiator shutter surface.
Remove the double-sided tape from the radiator shutter.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the radiator shutter.
Remove the release paper from a new No. 2 radiator grille seal.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 radiator grille seal as shown in the illustration.
| *1 | No. 6 Radiator Grille Seal | *a | Line |
Install a No. 2 radiator grille seal along the line on the radiator shutter.
88940C
7.INSTALL SWING GRILLE ACTUATOR ASSEMBLY
When installing a new swing grille actuator assembly:
Open the grille shutter fin as shown in the illustration.
for Type A:
|
Install in this Direction |
Install the swing grille actuator assembly as shown in the illustration.
for Type B:
|
Install in this Direction |
Install the swing grille actuator assembly as shown in the illustration.
Connect the connector.
85667E
8.INSTALL MOTOR COVER
|
Install in this Direction |
Engage the 4 claws as shown in the illustration to install the motor cover.