Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM3210E _59 Vehicle Exterior _047542 EXTERIOR PANELS / TRIM _0243316 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75860A 1.INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY

a.

Engage the 10 clips as shown in the illustration.

B436027C01
0,0 0,0 false
V113147

Install in this Direction - -



b.

Install the 7 screws.


c.

Install the body rocker panel moulding assembly with new 7 clips.


Hide 65632D 2.INSTALL REAR WHEEL HOUSE FRONT PLATE