Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM3210E _59 Vehicle Exterior _047542 EXTERIOR PANELS / TRIM _0243316 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 65632D 1.REMOVE REAR WHEEL HOUSE FRONT PLATE

Hide 75860A 2.REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY

a.

Apply protective tape around the body rocker panel moulding assembly and doors as shown in the illustration.

B436023C01
0,0 0,0 false
V100155

Protective Tape - -



b.

Remove the 7 clips.

B436024


c.

Remove the 7 screws.

B436025


d.

Disengage the 10 clips as shown in the illustration to remove the body rocker panel moulding assembly.

B436026C01
0,0 0,0 false
V113147

Remove in this Direction - -