Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › QUARTER GARNISH
RM3210E _59 Vehicle Exterior _047542 EXTERIOR PANELS / TRIM _0243323 QUARTER GARNISH A

EXTERIOR PANELS / TRIM  QUARTER GARNISH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 62506C 1.INSTALL QUARTER PILLAR COVER SUB-ASSEMBLY

HINT:

When installing a new quarter pillar cover sub-assembly, heat the vehicle body and quarter pillar cover sub-assembly using a heat light.


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Quarter Pillar Cover Sub-assembly 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or quarter pillar cover sub-assembly excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Remove the release paper from a new quarter pillar cover sub-assembly.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



c.
B436067C02
2.458,2.042 2.927,1.854 false 2.969,1.76 3.281,1.917 0.313,0.156 10 false *a
*a Double-sided Tape
V113147

Install in this Direction


Engage the 6 clips and attach the double-sided tape as shown in the illustration to install the quarter pillar cover sub-assembly.

HINT:

Press the quarter pillar cover sub-assembly to install it.