Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM
RM3210E _54 Brake _047522 PARKING BRAKE _0243347 PARKING BRAKE SYSTEM N

PARKING BRAKE  PARKING BRAKE SYSTEM  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT PARKING BRAKE PEDAL TRAVEL

a.

Completely release the parking brake pedal.


b.

Fully depress the parking brake pedal to engage the parking brake.


c.

Depress the parking brake pedal again to disengage the parking brake.


d.
C233618

Slowly depress the parking brake pedal using the specified force, and count the number of clicks.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)


If the parking brake pedal travel is not as specified, adjust the parking brake shoe clearance and parking brake pedal travel.


Hide 2.ADJUST PARKING BRAKE PEDAL TRAVEL

a.

Completely release the parking brake pedal.


b.
C345658

Turn the No. 1 wire adjusting nut until the parking brake pedal travel is corrected to within the specified range.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)


NOTICE:

If the No. 1 wire adjusting nut has been removed from the No. 1 parking brake cable assembly, replace the No. 1 wire adjusting nut with a new one.



c.

Operate the parking brake pedal 3 to 4 times, and check the parking brake pedal travel.

Parking Brake Pedal Travel:

8 to 11 notches at 300 N (31 kgf, 67.4 lbf)



d.

Check that the parking brake does not drag.


e.
C346587C02
0.719,1.698 1.531,1.698 true 1.688,1.156 2.25,0.344 2.25,0.344 2.51,0.344 true 0.531,1.615 0.844,1.771 0.313,0.156 10 false *a 2.563,0.25 2.875,0.406 0.313,0.156 10 false *b
*a Stopper
*b Operation Lever


Release the parking brake pedal and check that the clearance between the rear disc brake cylinder assembly operation lever and the stopper is as specified below.

Clearance:

0.5 mm (0.0197 in.) or less


If the clearance is not as specified, replace the rear disc brake cylinder assembly.


Hide 3.INSPECT BRAKE WARNING LIGHT

a.

When operating the parking brake pedal, check that the brake warning light illuminates.

Standard:

The brake warning light always illuminates at the first click.