Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE LINE
RM3210E _54 Brake _047517 BRAKE SYSTEM (OTHER) _0243387 BRAKE LINE L

BRAKE SYSTEM (OTHER)  BRAKE LINE  PRECAUTION  


TROUBLESHOOTING PRECAUTION


NOTICE:
·

Since the brake lines are critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormalities are found, replace the component with a new one.

·

When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.

·

Do not damage or deform the brake lines during the removal and installation procedures.

·

When installing a brake line or flexible hose, ensure that they are free from twists or kinks.

·

Do not deform the bracket or the body when connecting a brake line and flexible hose.

·

If the metal end of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

·

Flexible hoses must be free from shock absorber oil, grease, etc.

·

When installing a brake line to a plastic clamp, ensure that the brake line is not loose or pinched.

·

Do not reuse any clips or plastic clamps removed from a flexible hose.

·

After installing a brake line or flexible hose, ensure that they do not interfere with any other components or vehicle body.

·

Do not allow brake fluid on any painted vehicle body surface. If brake fluid leaks onto any painted surface, immediately wash it off.




DISCONNECTING AND CONNECTING FLEXIBLE HOSE AND BRAKE LINE


a.
C347174C02
0.969,1.719 0.969,1.385 false 0.854,0.844 1.229,0.844 false 1.615,0.885 1.615,0.385 1.615,0.385 1.781,0.385 false 2.958,2.979 2.958,2.594 2.958,2.594 2.771,2.594 false 2.333,3.813 2.333,3.479 false 1.104,3.813 1.104,3.479 false 3.01,1.729 3.01,1.396 false 1.615,1.99 1.615,1.813 1.615,1.813 1.396,1.813 false 0.125,0.156 0.438,0.313 0.313,0.156 10 false *a 0.177,2.469 0.458,2.688 0.281,0.219 10 false *b 0.906,1.729 1.219,1.885 0.313,0.156 10 false *c 1.823,0.302 2.135,0.458 0.313,0.156 10 false *d 1.563,2 1.865,2.208 0.302,0.208 10 false *e 0.719,0.771 1.031,0.927 0.313,0.156 10 false *f 2.948,1.74 3.26,2 0.313,0.26 10 false *g 2.271,3.833 2.563,4.01 0.292,0.177 10 false *c 2.604,2.51 2.896,2.719 0.292,0.208 10 false *d 1.042,3.823 1.323,4.052 0.281,0.229 10 false *g
*a Disconnecting
*b Connecting
*c Hold
*d Turn
*e Flexible Hose
*f Brake Line
*g Clip


Disconnecting:

i.

Hold the flexible hose with a wrench and disconnect the brake line using a union nut wrench without deforming the brake line.


ii.

Remove the clip and disconnect the flexible hose.



b.

Connecting:

i.

Secure the flexible hose with a new clip. At this time, be sure to securely install the clip.


ii.

Connect the brake line using a union nut wrench without deforming the brake line.




CONNECTING BRAKE LINE AND WAY


a.
C347175C02
0.906,2.417 1.344,2.417 true 2.427,0.854 2.427,0.51 false 1.01,0.792 0.865,0.542 0.865,0.542 0.656,0.542 false 0.479,0.469 0.656,0.646 0.177,0.177 10 false *a 2.375,0.875 2.688,1.031 0.313,0.156 10 false *b 0.76,2.333 0.927,2.521 0.167,0.188 10 true *c
*a Hold
*b Turn
*c Way


Support the way to prevent deformation of the brake line and connect the brake line to the way with a union nut wrench.


b.

Support the way to prevent deformation of the brake line and install the bolt to secure the way to the vehicle body.