Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM3210E _56 Audio / Visual / Telematics _047510 AUDIO / VIDEO _0243397 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Cellular Phone Inspection  


PROCEDURE

1.CHECK USAGE CONDITION
a.

Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.


·

The cellular phone is "Bluetooth" compatible.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION

·

The cellular phone is registered as a hands-free device.

·

The "Bluetooth" setting of the cellular phone is on.

·

The operating system and software of the cellular phone are the latest versions.

·

There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.



b.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

Result:
Result Proceed to
The cellular phone is connected correctly. A
The cellular phone is not connected correctly. B




A

END

B

2.RESTART CELLULAR PHONE
2.RESTART CELLULAR PHONE
a.

Restart the cellular phone.


b.

Turn the power switch off.


c.

Turn the power switch on (ACC).


d.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

Result:
Result Proceed to
The cellular phone is connected correctly. A
The cellular phone is not connected correctly. B




A

END

B

3.CHECK OPERATION
3.CHECK OPERATION
a.

Check if the in-vehicle device can be recognized by the cellular phone.

Result:
Result Proceed to
In-vehicle device can be recognized. A
In-vehicle device cannot be recognized. B




A

4.REGISTER AGAIN

B

5.CHECK USING ANOTHER VEHICLE
4.REGISTER AGAIN
a.

Clear all "Bluetooth" devices registered to the cellular phone and radio and display receiver assembly.


b.

Register the cellular phone as a connected device again.


c.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

Result:
Result Proceed to
The cellular phone is connected correctly. A
The cellular phone is not connected correctly. B




A

END

B

5.CHECK USING ANOTHER VEHICLE
5.CHECK USING ANOTHER VEHICLE
a.

Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

HINT:
·

Make sure to obtain the customer's permission to perform this procedure.

·

After the inspection, clear the registered information and usage history acquired during the inspection.



Result:
Result Proceed to
The cellular phone is connected correctly. A
The cellular phone is not connected correctly. B




A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

6.CHECK USING A KNOWN GOOD CELLULAR PHONE
6.CHECK USING A KNOWN GOOD CELLULAR PHONE
a.

Check if the system functions normally using a known good "Bluetooth" compatible cellular phone.

HINT:
·

Make sure to obtain the customer's permission to perform this procedure.

·

After the inspection, clear the registered information and usage history acquired during the inspection.



Result:
Result Proceed to
The cellular phone is connected correctly. A
The cellular phone is not connected correctly. B




A

END (ONLY A COMPATIBLE "Bluetooth" CELLULAR PHONE CAN BE USED)

B

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE