Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER
RM3210E _56 Audio / Visual / Telematics _047510 AUDIO / VIDEO _0243402 INSTRUMENT PANEL SPEAKER G

AUDIO / VIDEO  INSTRUMENT PANEL SPEAKER  INSPECTION  


PROCEDURE

Hide 86160P 1.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for 6 Speakers)

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E226097C16
1.333,1.802 1.083,2.469 false 1.677,1.813 1.563,2.229 false 2.302,1.813 2.417,2.229 false 1.99,1.802 2.167,2.469 false 0.198,0.094 0.521,0.5 0.323,0.406 10 *a 1.5,2.24 1.656,2.385 0.156,0.146 10 + 0.656,2.51 1.302,2.656 0.646,0.146 10 TWR+*A 0.656,2.688 1.26,2.833 0.604,0.146 10 TWL+*B 1.844,2.51 2.49,2.656 0.646,0.146 10 TWR-*A 1.844,2.688 2.448,2.833 0.604,0.146 10 TWL-*B 2.417,2.208 2.531,2.354 0.115,0.146 10 -
*A for RH
*B for LH
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance of the speaker.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
4 (TWR+) - 2 (TWR-) Always 10 kΩ or higher
1 (-) - 2 (TWR-) Always Below 1 Ω
3 (+) - 4 (TWR+) Always Below 1 Ω

for LH
Tester Connection Condition Specified Condition
4 (TWL+) - 2 (TWL-) Always 10 kΩ or higher
1 (-) - 2 (TWL-) Always Below 1 Ω
3 (+) - 4 (TWL+) Always Below 1 Ω


If the result is not as specified, replace the speaker.


d.

When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

HINT:

Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.



Hide 86160P 2.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (for 10 Speakers)

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.

When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

HINT:

Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.