Home › Drivetrain › P610 HYBRID TRANSMISSION / TRANSAXLE › ELECTRONIC SHIFT LEVER SYSTEM
RM3210E _52 Drivetrain _047503 P610 HYBRID TRANSMISSION / TRANSAXLE _0243554 ELECTRONIC SHIFT LEVER SYSTEM D

P610 HYBRID TRANSMISSION / TRANSAXLE  ELECTRONIC SHIFT LEVER SYSTEM  SYSTEM DESCRIPTION  


SYSTEM DESCRIPTION


The electronic shift lever system electrically controls the parking lock mechanism using an actuator.

The hybrid vehicle control ECU locks/unlocks gearshift control based on lock/unlock request signals from the certification ECU (smart key ECU assembly).

The hybrid vehicle control ECU receives the theft deterrent status (lock or unlock) from the certification ECU (smart key ECU assembly).

Based on this signal, and other information received from the hybrid vehicle control ECU, the hybrid vehicle control ECU controls the shift control actuator assembly and other parts of the system.

The hybrid vehicle control ECU stores DTCs when there is a malfunction in the system, and informs the driver of selected malfunctions by illuminating the master warning light and displaying a warning message on the multi-information display.

HINT:

Depending on the DTC that is stored, the master warning light may not illuminate and a warning message may not be displayed on the multi-information display.



P POSITION SWITCH INDICATOR LIGHT CONTROL


a.

The P position switch indicator light comes on when park (P) is selected, goes off when a shift state other than park (P) is selected and goes off when a system malfunction occurs and a warning message is displayed on the multi-information display.

P Position Switch Indicator Light
DTC No. Indicator Light Suspected Cause
P1C8949
P1C8A49
P1C8B49
P1C8C49
P1C8D49
Goes off
·

Hybrid vehicle control ECU or signal circuit malfunction

·

Shift control actuator assembly or signal circuit malfunction

·

Discharged auxiliary battery

·

No. 1 integration relay (P-CON relay) malfunction


P1C8E49 Goes off Continuous abnormal current
P1C8F14 Goes off Open or short in shift control actuator assembly (parking lock motor (MUA)) signal circuit
P1C9414 Goes off Open or short in shift control actuator assembly (parking lock motor (MVA)) signal circuit
P1C9914 Goes off Open or short in shift control actuator assembly (parking lock motor (MWA)) signal circuit
P272C00 Goes off Shift changing time malfunction
P272C46 Normal
(Comes on when park (P) is selected and goes off when another shift state is selected)
Hybrid vehicle control ECU internal error
P272C73 Normal
(Comes on when park (P) is selected and goes off when another shift state is selected)
No. 1 integration relay (P-CON relay) short
P272D19 Goes off Power source circuit malfunction

NOTICE:

Even if the system has returned to normal, if park (P) is selected, the P position switch indicator light does not return to normal without selecting a shift state other than park (P). (Normal refers to the P position switch indicator light coming on when park (P) is selected and going off when another shift state is selected.)