Home › Drivetrain › P610 HYBRID TRANSMISSION / TRANSAXLE › ELECTRONIC SHIFT LEVER SYSTEM
RM3210E _52 Drivetrain _047503 P610 HYBRID TRANSMISSION / TRANSAXLE _0243554 ELECTRONIC SHIFT LEVER SYSTEM D

P610 HYBRID TRANSMISSION / TRANSAXLE  ELECTRONIC SHIFT LEVER SYSTEM  FREEZE FRAME DATA  


CHECK FREEZE FRAME DATA


HINT:

The hybrid vehicle control ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored. Freeze frame data can help determine the vehicle conditions when the malfunction occurred and help duplicate conditions when troubleshooting.


a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


e.

Select a DTC in order to display its freeze frame data.

Powertrain > Hybrid Control > Trouble Codes
50001 397


LIST OF FREEZE FRAME DATA


Powertrain > Hybrid Control
Tester Display Measurement Item Range
P Position SW Terminal Voltage P position switch voltage 0 to 4.99 V
Shift Sensor Voltage (VSI1) Shift sensor (VSI1) voltage 0 to 4.99 V
Shift Sensor Voltage (VSI2) Shift sensor (VSI2) voltage 0 to 4.99 V
Shift Sensor Voltage (VSI3) Shift sensor (VSI3) voltage 0 to 4.99 V
Shift Sensor Voltage (VSI4) Shift sensor (VSI4) voltage 0 to 4.99 V
P Control Request Status Shift control actuator assembly operation request No Request / Lock(Normal) / Unlock(Normal) / Lock(Abnormal) / Unlock(Abnormal)
P Control Status P position system status Lock Position (Normal) / Lock Position (Abnormal) / Indefinite Position (Normal) / Indefinite Position (Abnormal) / Unlock Position (Normal) / Unlock Position (Abnormal) / Lock Position (Normal) / Lock Position (Abnormal) / Indefinite Position (Normal) / Indefinite Position (Abnormal) / Unlock Position (Normal) / Unlock Position (Abnormal)
Target P Position Target shift position of shift control actuator assembly Unlock / Incertitude / Lock
P Position Status Park (P) shift state status Unlock / Incertitude / Lock
P Position Status before Last Previous park (P) shift state status Unlock / Incertitude / Lock
Parking Lock Motor Position Shift control actuator assembly position -32768 to 32767
Parking Lock Motor Revolution Shift control actuator assembly rotation speed -32768 to 32767 rpm
Normal Operating Range: 0 to 2000 rpm
Parking Lock Motor Rotation Direction Shift control actuator assembly operating direction Unlock / Incertitude / Lock
Parking Lock Motor Control Mode Shift control actuator assembly control mode Startup / Initially Drive / Lock Position Learn / Unlock Position Learn / Lock Position Learning Complete / Unlock Position Learning Complete / P Position Change / Motor Control (Abnormal)
Parking Lock Motor Drive Mode Shift control actuator assembly drive mode No Control / Rotary Drive (Normal) / Stop / Rotation Direction Change Drive / Rotary Drive (Initial/Abnormal)
Parking Lock Motor Current Sensor Voltage Shift control actuator assembly sensor voltage 0 to 4.99 V
Fail Safe Status (Shift Sensor) Fail-safe control status during shift sensor malfunction No Fail Safe / Fail Safe2 / Fail Safe3 / Fail Safe4 / Fail Safe5
Fail Safe Status (Parking Lock Motor) Fail-safe control status when shift control actuator assembly malfunction detected No Fail Safe / Fail Safe1 / Fail Safe2 / Fail Safe3 / Fail Safe4 / Fail Safe5
Fail Safe History (Parking Lock Motor Inoperative) Shift control actuator assembly malfunction fail-safe control history OFF / ON
W Phase Parking Lock Motor Current-Carrying Status W phase current-carrying status OFF / ON
V Phase Parking Lock Motor Current-Carrying Status V phase current-carrying status OFF / ON
U Phase Parking Lock Motor Current-Carrying Status U phase current-carrying status OFF / ON
W Phase Parking Lock Motor Terminal Voltage W phase voltage value 0 to 4.99 V
V Phase Parking Lock Motor Terminal Voltage V phase voltage value 0 to 4.99 V
U Phase Parking Lock Motor Terminal Voltage U phase voltage value 0 to 4.99 V
Parking Lock Motor Relay Status for Hybrid Control System No. 1 integration relay (P-CON relay) ON / OFF
Parking Lock Motor Relay Status for Transmission Control System No. 1 integration relay (P-CON relay) OFF / ON
Master Warning Malfunction information status OFF / ON
Parking Lock Motor Malfunction (Initial Drive) Shift control actuator assembly malfunction (initial operation) OFF / ON
Parking Lock Motor Malfunction (P Position Change) Shift control actuator assembly malfunction (When shift state changed to/from park (P)) OFF / ON
Parking Lock Motor Circuit History History of parking lock motor circuit malfunction OFF / ON
P Position Change Delayed History History of park (P) state change delay malfunction OFF / ON
P Position Switch Indicator P position switch indicator illumination status OFF / ON
P Position Switch Indicator Dimming Request P position switch indicator dim signal status Non-dimming / Dimming
Meter Display Request (P Position Switch ON when Running) Status of P position switch rejection notification OFF / ON
Meter Display Request (Shift N Operation when Running) Status of change to neutral (N) shift status message OFF / ON
Meter Display Request (Shift Operation NG) Status of shift status change rejection message 0 to 255
Entry&Start ECU Notice Request (Shift R/D Operation during Ready OFF) Certification ECU notice request (Shift lever moved to R or D when power switch not on (READY)) OFF / ON
BATT Voltage for Transmission Control System IG (+B) voltage value 0 to 79.99 V
Auxiliary Battery Voltage for Transmission Control System BATT voltage value 0 to 79.99 V
Lock Position Learning Value Learned value of lock position -32768 to 32767
Unlock Position Learning Value Learned value of unlock position -32768 to 32767
Complete of Learn Unlock Position Completion of unlock position learning OK / NG
Complete of Detect Unlock Position Completion of detecting unlock position OK / NG
Complete of Learn Lock Position Completion of lock position learning OK / NG
Complete of Detect Lock Position Completion of detecting lock position OK / NG
Complete of Initially Drive Parking Lock Control Initial drive control completed OK / NG
Braking Torque Judgment for Brake Pedal Regenerative braking status Not Available / Available
P Position Automatic Change Request P position automatic change request OFF / ON