Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
RM3210E _59 Vehicle Exterior _047533 LIGHTING (EXT) _0244228 LIGHTING SYSTEM W

LIGHTING (EXT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LIGHTING SYSTEM (EXT)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control, Illuminated Entry or Warning.


v.

Select the setting by referring to the table below.

Light Control
Tester Display Description Default Setting ECU
Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position.*2 Normal 0:Normal,1:Long Main Body ECU (Multiplex Network Body ECU)
Disp Ex ON Sen Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
Disp Ex OFF Sen Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
Light Auto OFF Delay Keep the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on.*3 30 s 00:OFF,01:30 s,10:60 s,11:90 s Main Body ECU (Multiplex Network Body ECU)
Sensitivity Adjusts the sensitivity of the automatic light control system.*C Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main Body ECU (Multiplex Network Body ECU)
Follow Me Home Lighting Time Sets the headlight lighting time after the power switch is turned off.*1 30 s 00:30 s,01:60 s,10:90 s,11:120 s Main Body ECU (Multiplex Network Body ECU)
50006 8
Warning
Tester Display Description Default Setting ECU
Lane Change Flashing Times Setting Function to change the lane change flashing times. 3 000:OFF,001:3,010:4,011:5,100:6,101:7 Combination Meter Assembly
50006 7

*1: w/ Follow Me Home System

*2: for vehicles with customize setting "Response Time"

*3: for vehicles with customize setting "Light Auto OFF Delay"


HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*A

E259624E01
0.375,0.333 2.292,0.708 1.917,0.375 10 Brightness level required to dim the lights 2.771,0.542 3.385,0.74 0.615,0.198 10 Dark 6.281,0.542 6.896,0.74 0.615,0.198 10 Bright 1.083,1.104 1.729,1.333 0.646,0.229 10 Setting 2.667,1.104 3.313,1.333 0.646,0.229 10 DARK2 3.521,1.104 4.167,1.333 0.646,0.229 10 DARK1 4.406,1.104 5.083,1.333 0.677,0.229 10 NORMAL 5.333,1.104 6.01,1.333 0.677,0.229 10 LIGHT1 6.177,1.104 6.76,1.313 0.583,0.208 10 LIGHT2

*B

E259624E02
0.323,0.302 2.427,0.698 2.104,0.396 10 false Brightness level required to cancel the dimming of the lights 1.104,1.094 2,1.365 0.896,0.271 10 false Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 false Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 false Bright 2.688,1.115 3.24,1.365 0.552,0.25 10 false DARK2 3.573,1.115 4.125,1.365 0.552,0.25 10 false DARK1 4.396,1.115 5.042,1.344 0.646,0.229 10 false NORMAL 6.229,1.115 6.781,1.365 0.552,0.25 10 false LIGHT2 5.344,1.115 5.896,1.365 0.552,0.25 10 false LIGHT1

*C

E259624E03
0.365,0.302 2.354,0.708 1.99,0.406 10 Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 Bright 2.719,1.115 3.271,1.365 0.552,0.25 10 Dark2 3.615,1.115 4.167,1.365 0.552,0.25 10 Dark1 4.469,1.115 5.021,1.365 0.552,0.25 10 Normal 6.271,1.115 6.823,1.365 0.552,0.25 10 Light2 5.375,1.115 5.927,1.365 0.552,0.25 10 Light1




b.

Customizing with the multi-display (w/ multi-display)

i.

Turn the power switch on (IG).


ii.

Enter the following menus:

·

Type A: APPS / Setup / Vehicle / Vehicle customization / Lights settings.

·

Type B: MENU / Edit/settings / System / Vehicle settings / Vehicle customization / Lights settings.

·

Type C: SETUP / Vehicle / Vehicle customization / Lights settings.

·

Type D: MENU / Setup / Vehicle / Vehicle customization / Lights settings.



iii.

Select the setting by referring to the table below.

Lights settings
Tester Display Description Default Setting ECU
Light Sensor sensitivity Adjusts the sensitivity of the automatic light control system.*A 0 -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
Headlamps Auto-Off Timer* Keeps the headlights on for a certain period of time after turning the power switch off and closing all of doors with the low beam headlights on. 30 sec. Off, 30 sec., 60 sec. or 90 sec. Main Body ECU (Multiplex Network Body ECU)

*: for vehicles with customize setting "Headlamps Auto-Off Timer"


HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*A

E259624E05
0.365,0.302 2.354,0.708 1.99,0.406 10 Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 Bright 2.813,1.125 3.365,1.375 0.552,0.25 10 -2 3.708,1.125 4.26,1.375 0.552,0.25 10 -1 4.646,1.125 5.198,1.375 0.552,0.25 10 0 6.375,1.125 6.729,1.323 0.354,0.198 10 +2 5.49,1.125 5.854,1.333 0.365,0.208 10 +1




c.

Customizing with the multi-information display (combination meter assembly (meter circuit plate)) (w/o multi-display)

i.

Turn the power switch on (IG).


ii.

Select the setting tab in the multi-information display.


iii.

Enter the following menus: Vehicle settings / Lights settings.


iv.

Select the setting by referring to the table below.

Lights settings
Tester Display Description Default Setting ECU
Headlamps-On sensitivity Adjusts the sensitivity of the automatic light control system.*A 0 -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
Headlamps Auto-Off Timer* Keeps the headlights on for a certain period of time after turning the power switch off and closing all of doors with the low beam headlights on. 30 sec. Off, 30 sec., 60 sec. or 90 sec. Main Body ECU (Multiplex Network Body ECU)

*: for vehicles with customize setting "Headlamps Auto-Off Timer"


HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*A

E259624E05
0.365,0.302 2.354,0.708 1.99,0.406 10 Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 Bright 2.813,1.125 3.365,1.375 0.552,0.25 10 -2 3.708,1.125 4.26,1.375 0.552,0.25 10 -1 4.646,1.125 5.198,1.375 0.552,0.25 10 0 6.375,1.125 6.729,1.323 0.354,0.198 10 +2 5.49,1.125 5.854,1.333 0.365,0.208 10 +1