Home › Engine / Hybrid System › CRUISE CONTROL › DRIVING SUPPORT ECU
RM3210E _51 Engine / Hybrid System _047527 CRUISE CONTROL _0244352 DRIVING SUPPORT ECU A

CRUISE CONTROL  DRIVING SUPPORT ECU  INSTALLATION  


PROCEDURE

Hide 88150A 1.INSTALL DRIVING SUPPORT ECU ASSEMBLY

a.

Connect the connector.


b.

Engage the guide.


c.

Install the driving support ECU assembly with the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

NOTICE:

If the driving support ECU assembly has been struck or dropped, replace the driving support ECU assembly with a new one.



Hide 2.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY