Home › Engine / Hybrid System › CRUISE CONTROL › MILLIMETER WAVE RADAR SENSOR
RM3210E _51 Engine / Hybrid System _047527 CRUISE CONTROL _0244353 MILLIMETER WAVE RADAR SENSOR A

CRUISE CONTROL  MILLIMETER WAVE RADAR SENSOR  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not damage the millimeter wave radar sensor assembly.

·

If the No. 1 millimeter wave radar sensor bracket has been removed/installed, be sure to perform adjustment.



PROCEDURE

Hide 88215 1.INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET

a.
E336347N01
1.479,1.135 1.635,1.333 0.156,0.198 10 true 1 2.49,1.281 2.646,1.479 0.156,0.198 10 true 2

Temporarily install the No. 1 millimeter wave radar sensor bracket with the 2 screws.


b.

Tighten the 2 screws to install the No. 1 millimeter wave radar sensor bracket.

HINT:

Tighten the screws in the order shown in the illustration.