Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH
RM3210E _59 Vehicle Exterior _047505 DOOR / HATCH _0244376 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY

a.

Check the operation of the opener switch.

i.
B432186C03
0.24,0.188 0.552,0.385 0.313,0.198 10 false *a
*a Component without harness connected
(Back Door Opener Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Back door opener switch not pushed 10 kΩ or higher
2 - 3 Back door opener switch pushed Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.



b.

Check the operation of the lock switch. (w/ Entry and Start System)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Back door lock switch not pushed 10 kΩ or higher
1 - 2 Back door lock switch pushed Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.