Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR WEATHERSTRIP
RM3210E _59 Vehicle Exterior _047505 DOOR / HATCH _0244384 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.

Clean the vehicle body.


b.

Align the joint of a new back door weatherstrip with the back door lock striker and temporarily install the back door weatherstrip.

B433834C02
3.583,2.406 3.698,2.635 true 5.688,1.5 5.688,1.802 true 1.5,1.51 1.5,1.813 true 3.583,0.854 3.75,0.615 true 3.75,0.51 3.938,0.688 0.188,0.177 10 true *a 1.448,1.823 1.76,1.979 0.313,0.156 10 false *b 3.708,2.542 3.948,2.729 0.24,0.188 10 true *c 5.656,1.813 5.969,1.969 0.313,0.156 10 false *b
*a Alignment mark (Orange) *b Alignment mark (Light Blue)
*c Joint - -
V100135

Flange Position - -



c.

Align the alignment marks on the back door weatherstrip with the flanges on the vehicle body indicated by the arrows, and install the back door weatherstrip.

NOTICE:

After installation, check that the corners fit correctly.