Home › General › SPECIFICATIONS › 2ZR-FXE ENGINE CONTROL
RM3210E _V1 General _047544 SPECIFICATIONS _0224698 2ZR-FXE ENGINE CONTROL F

SPECIFICATIONS  2ZR-FXE ENGINE CONTROL  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Camshaft timing oil control valve assembly x Cylinder head cover sub-assembly with 10 mm union nut wrench 8.8 90 78
without 10 mm union nut wrench 10 102 7
Throttle body assembly x Intake manifold 10 102 7
Air cleaner hose assembly x Throttle body assembly 2.0 20 18
Air cleaner cap sub-assembly x Air cleaner hose assembly 2.0 20 18
No. 2 ECM bracket x ECM 4.5 46 40
No. 1 ECM bracket x ECM 4.5 46 40
ECM x Vehicle body Bolt 13 133 10
Nut 8.0 82 71
Engine wire x No. 1 ECM bracket 8.0 82 71
Camshaft position sensor x Cylinder head cover sub-assembly with 10 mm union nut wrench 8.8 90 78
without 10 mm union nut wrench 10 102 7
Crankshaft position sensor x Cylinder block sub-assembly 10 102 7
Spark plug x Cylinder head sub-assembly 20 204 15
Ignition coil assembly x Cylinder head cover sub-assembly 10 102 7
Engine coolant temperature sensor x Water outlet 19.6 200 14
Knock control sensor x Cylinder block sub-assembly 21 214 15
Air fuel ratio sensor x Exhaust manifold (TWC: Front Catalyst) with SST 39 398 29
without SST 44 449 32
Heated oxygen sensor x Front exhaust pipe assembly (TWC: Rear Catalyst) with SST 39 398 29
without SST 44 449 32
Front center floor brace x Vehicle body 29 296 21