Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
RM3210E _58 Vehicle Interior _047534 HEATING / AIR CONDITIONING _0244634 AIR CONDITIONING SYSTEM W

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE AIR CONDITIONING SYSTEM


a.

Customizing with the GTS.

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


i.

Connect the GTS.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Air Conditioner.


v.

Select the setting by referring to the table below.

Air Conditioner
Tester Display Description Default Setting ECU
S-FLOW Control Auto Function Function to turn the S-FLOW control on automatically when the power switch is turned on (IG) ON 0:ON,1:OFF Air conditioning amplifier assembly
Set Temperature Shift Function to perform control with the shifted temperature versus the displayed temperature Normal 00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C Air conditioning amplifier assembly
Air Inlet Mode Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly* Automatic 0:Automatic,1:Manual Air conditioning amplifier assembly
Foot/DEF Auto Mode Function to turn the airflow to foot/defroster automatically when AUTO mode is on ON 0:ON,1:OFF Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function Function to increase the blower level automatically when the defroster is on ON 0:ON,1:OFF Air conditioning amplifier assembly
Ambient Temperature Shift Function to display the shifted ambient temperature versus the actual ambient temperature Normal 0000001:-3C,0000010:-2C,0000100:-1C,0001000:Normal,0010000:+1C,0100000:+2C,1000000:+3C Air conditioning amplifier assembly
ECO MODE Cancel Function to cancel ECO mode when set to ON ON 0:OFF,1:ON Air conditioning amplifier assembly
Noise and Vibration Reduction Function to change the speed of the compressor when set to ON OFF 0:OFF,1:ON Air conditioning amplifier assembly
Refrigerant Shortage Check Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON ON 0:ON,1:OFF Air conditioning amplifier assembly
Fan speed increment control Function to set the speed to reach the target blower fan speed when AUTO mode is on Normal 001:Slow,010:Normal,100:Fast Air conditioning amplifier assembly
Outside Air Mode Auto Switch Function Function to automatically change the air inlet to FRESH mode when the power switch is off for 60 seconds* ON 0:ON,1:OFF Air conditioning amplifier assembly
50006 11

*: w/ Rear Seat Belt Warning




b.

Customizing with the multi-display (w/ Multi-display).

i.

Turn the power switch on (IG).


ii.

Enter the following menus:

·

Type A: APPS / Setup / Vehicle / Vehicle customization / Climate settings.

·

Type B: MENU / Edit / settings / System / Vehicle settings / Vehicle customization / Climate settings.

·

Type C: SETUP / Vehicle / Vehicle customization / Climate settings.

·

Type D: MENU / Setup / Vehicle / Vehicle customization / Climate settings.



iii.

Select the setting by referring to the table below.

Climate settings
Display Default Content Setting ECU
Efficient ventilation mode* On Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly On or Off Air conditioning amplifier assembly

*: w/ Rear Seat Belt Warning




c.

Customizing with the multi-information display (combination meter assembly (meter circuit plate)) (w/o Multi-display).

i.

Turn the power switch on (IG).


ii.

Select the setting tab in the multi-information display.


iii.

Enter the following menus: Vehicle settings / Climate settings.


iv.

Select the setting by referring to the table below.

Climate settings
Display Default Content Setting ECU
Efficient ventilation mode* On Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly On or Off Air conditioning amplifier assembly

*: w/ Rear Seat Belt Warning