58441E
1.REMOVE BATTERY SERVICE HOLE COVER
Remove the clip.
Disengage the 5 claws and remove the battery service hole cover.
G92DH
2.REMOVE NO. 1 HV BATTERY INTAKE FILTER
If the message "Maintenance Required for Hybrid Battery Cooling Parts at Your Dealer" is displayed on the multi-information display in the combination meter assembly, inspect the No. 1 HV battery intake filter.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY COOLING FILTER>INSPECTION
Disengage the claw.
Disengage the 2 claws to remove the No. 1 HV battery intake filter from the battery service hole cover.