Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM
RM3210E _56 Audio / Visual / Telematics _047512 PARK ASSIST / MONITORING _0244855 TOYOTA PARKING ASSIST-SENSOR SYSTEM D

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

This system uses ultrasonic sensors to detect any obstacles at the corners and the rear of the vehicle. The system then informs the driver of the distance between the sensors and an obstacle as well as their positions by indicating them on the multi-information display (on the meter circuit plate), multi-display (on the navigation receiver assembly*1*2 or radio and display receiver assembly*1*3) and by sounding a buzzer.

*1: w/ Parking Assist Monitor System

*2: for Navigation Receiver Type

*3: for Radio and Display Receiver Type




FUNCTION OF COMPONENTS


Component Function
·

Front Side Ultrasonic Sensor (LH/RH)

·

Front Center Ultrasonic Sensor (LH/RH)

·

Front Corner Ultrasonic Sensor (LH/RH)

·

Rear Side Ultrasonic Sensor (LH/RH)

·

Rear Center Ultrasonic Sensor (LH/RH)

·

Rear Corner Ultrasonic Sensor (LH/RH)


Detects the distance between the vehicle and an obstacle
·

No. 1 Clearance Warning Buzzer

·

No. 2 Clearance Warning Buzzer


Sounds to inform the driver according to the distance to an obstacle
Multi-information Display (on Meter Circuit Plate)
·

Displays the location of an obstacle and the approximate distance between the vehicle and the obstacle

·

Displays a malfunction of the ultrasonic sensor to inform the driver


Clearance Sonar Indicator (on Meter Circuit Plate) Illuminates to inform the driver while the TOYOTA parking assist-sensor system power is on (the power switch is on (IG) and the TOYOTA parking assist-sensor system is on)
Meter Circuit Plate
·

Transmits the ON/OFF signal to the clearance warning ECU assembly

·

Transmits the vehicle speed signal to the clearance warning ECU assembly


Steering Pad Switch Assembly
- Multi-information Switch
Enables, disables or cuts off the operation of the TOYOTA parking assist-sensor system by transmitting the switch operation signal to the meter circuit plate
Clearance Warning ECU Assembly
·

Judges the approximate distance between the vehicle and an obstacle based on the signals from the ultrasonic sensors, and sends it to the multi-information display and rear television camera assembly*1

·

Judges the approximate distance between the vehicle and an obstacle based on the signals from the ultrasonic sensors and sounds the buzzer


Main Body ECU (Multiplex Network Body ECU) Transmits the destination information to the clearance warning ECU assembly
Hybrid Vehicle Control ECU Transmits the shift position signal to the clearance warning ECU assembly
·

Navigation Receiver Assembly*1*2

·

Radio and Display Receiver Assembly*1*3


Receives the video signals from the rear television camera assembly, and displays them on the display panel
Rear Television Camera Assembly*1 Receives the ultrasonic sensor information via CAN communication and sends it to the navigation receiver assembly*2 or radio and display receiver assembly*3 through the video signal cable

*1: w/ Parking Assist Monitor System

*2: for Navigation Receiver Type

*3: for Radio and Display Receiver



OPERATION EXPLANATION


a.

The operating conditions of each ultrasonic sensor differ according to the installation position as shown in the table below.

Installation Position Operating Condition
Front Corner
·

Power switch is on (READY).

·

TOYOTA parking assist-sensor system is on.

·

A shift state other than park (P) has been selected.

·

Vehicle speed is less than approximately 10 km/h (6 mph).


Front Center
·

Power switch is on (READY).

·

TOYOTA parking assist-sensor system is on.

·

A shift state other than park (P) or reverse (R) has been selected.

·

Vehicle speed is less than approximately 10 km/h (6 mph).


Front Side
·

Power switch is on (READY).

·

TOYOTA parking assist-sensor system is on.

·

A shift state other than park (P) has been selected.

·

Steering wheel is turned approximately 90° or more.

·

Vehicle speed is less than approximately 10 km/h (6 mph).


Rear Corner
·

Power switch is on (READY).

·

TOYOTA parking assist-sensor system is on.

·

Reverse (R) has been selected.

·

Vehicle speed is less than approximately 10 km/h (6 mph).


Rear Center
Rear Side
·

Power switch is on (READY).

·

TOYOTA parking assist-sensor system is on.

·

A shift state other than park (P) has been selected.

·

Steering wheel is turned approximately 90° or more.

·

Vehicle speed is less than approximately 10 km/h (6 mph).



When the system operates, the clearance warning ECU assembly transmits ultrasonic waves from the ultrasonic sensors. If these waves encounter an obstacle within one or more of the sensors ranges, the waves are reflected back to the sensors, which transmit them to the clearance warning ECU assembly.

Based on this information, the clearance warning ECU assembly sends signals to the meter circuit plate, the No. 1 clearance warning buzzer and the No. 2 clearance warning buzzer. The approximate distance between the vehicle and the obstacle is then indicated, and the buzzer sounds.

HINT:

Refer to Detection Range Measurement and Display Inspection.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>OPERATION CHECK



b.

Side sonar display and buzzer system description

i.

When the ultrasonic sensors (side sonar) detect an obstacle, the distance between the obstacle and the vehicle is calculated and it is determined if the obstacle is in the path of the vehicle.

E336434C01
3.26,2.479 3.531,2.479 3.531,2.479 3.76,2.24 false 3.052,2.406 3.26,2.594 0.208,0.188 10 false *a
*a 60 mm (2.4 in.) diameter pole - -



ii.

If the obstacle is determined to be in the path of the vehicle, notifications are displayed and the buzzer sounds.

E336435C01
3.865,2.26 4.146,2.542 4.146,2.542 4.354,2.542 false 3.833,1.281 4.573,2.094 4.573,2.094 4.781,2.094 true 4.396,2.458 4.708,2.615 0.313,0.156 10 false *a 4.813,2.021 5.125,2.177 0.313,0.156 10 false *b
*a 60 mm (2.4 in.) diameter pole *b Steering wheel turned 90°or more





COMMUNICATION SIGNALS OF COMPONENTS


HINT:
·

Allocation refers to the process of the clearance warning ECU assembly setting aside IDs for the sensors.

·

The vehicle has the sensors arranged in 2 groups. There is a front series and a rear series. The sensors are connected in a "daisy chain".



a.

Initialization mode (except Front Side Ultrasonic Sensor and Rear Side Ultrasonic Sensor):

An ID is allocated to each sensor and sensor diagnosis is performed.

E194329E09
1.865,0.573 2.167,0.573 2.167,0.573 2.24,1.052 false 1.75,0.979 1.979,0.979 1.979,0.979 2.167,1.438 false 1.844,2.927 2.052,2.927 2.052,2.927 2.208,2.344 false 1.667,2.094 1.969,2.094 1.969,2.094 2.125,1.948 false 5.438,0.344 5.333,0.344 5.333,0.344 5.281,1.021 false 3.052,0.552 2.896,0.552 2.896,0.552 2.854,0.969 false 5.5,0.948 5.427,0.948 5.427,0.948 5.344,1.417 false 5.531,2.844 5.406,2.844 5.406,2.844 5.292,2.396 false 5.479,2.073 5.417,2.073 5.417,2.073 5.365,1.969 false 5.49,0.229 6.792,0.521 1.302,0.292 10 false Rear Right Sensor 5.542,0.854 7.156,1.208 1.615,0.354 10 false Rear Right Center Sensor 5.552,1.979 7.115,2.333 1.563,0.354 10 false Rear Left Center Sensor 5.594,2.771 6.771,3.094 1.177,0.323 10 false Rear Left Sensor 0.667,0.448 2.313,0.802 1.646,0.354 10 false Front Right Sensor 0.885,1.594 1.313,1.76 0.427,0.167 10 false Front 3.094,0.458 5.333,0.802 2.24,0.344 10 false Clearance Warning ECU Assembly 0.125,0.865 1.771,1.219 1.646,0.354 10 false Front Right Center Sensor 0.115,1.979 1.729,2.333 1.615,0.354 10 false Front Left Center Sensor 0.74,2.802 2.177,3.188 1.438,0.385 10 false Front Left Sensor 0.146,0.083 0.99,0.344 0.844,0.26 12 false for LHD:

E339257E01
1.438,0.792 1.604,0.792 1.604,0.792 1.99,1.229 false 1.417,1.208 1.583,1.208 1.583,1.208 1.896,1.646 false 1.354,2.438 1.521,2.438 1.521,2.438 1.885,2.156 false 1.396,3.063 1.563,3.063 1.563,3.063 1.99,2.594 false 2.563,2.417 2.563,0.5 2.563,0.5 2.771,0.5 false 5.219,1.208 5.5,0.75 5.5,0.75 5.677,0.75 false 5.25,1.635 5.5,1.26 5.5,1.26 5.677,1.26 false 5.271,2.167 5.5,2.49 5.5,2.49 5.677,2.49 false 5.229,2.604 5.49,3.042 5.49,3.042 5.667,3.042 false 0.25,0.667 1.635,0.917 1.385,0.25 10 false Front Right Sensor 0.25,1.083 1.438,1.49 1.188,0.406 10 false Front Right Center Sensor 0.271,2.344 1.354,2.76 1.083,0.417 10 false Front Left Center Sensor 0.281,2.948 1.427,3.375 1.146,0.427 10 false Front Left Sensor 2.833,0.406 5.708,0.688 2.875,0.281 10 false Clearance Warning ECU Assembly 0.146,0.125 1.115,0.396 0.969,0.271 12 false for RHD: 5.75,0.656 6.99,0.906 1.24,0.25 10 false Rear Right Sensor 5.74,1.167 6.896,1.615 1.156,0.448 10 false Rear Right Center Sensor 5.75,2.354 6.823,2.708 1.073,0.354 10 false Rear Left Center Sensor 5.75,2.958 6.99,3.208 1.24,0.25 10 false Rear Left Sensor 0.667,1.802 1.25,2.031 0.583,0.229 10 false Front

i.

When the initial check is operating (the power switch is on (IG) and the TOYOTA parking assist-sensor system is on), the clearance warning ECU assembly provides power to the first sensors in each series (front left sensor and rear left sensor).


ii.

After the power is supplied, the front left sensor and rear left sensor enter standby mode to receive an ID from the ECU. When a certain amount of time has elapsed, the ECU sends an ID allocation signal to these sensors.


iii.

The front left sensor and rear left sensors receive the ID allocation signal from the ECU and perform self-diagnosis. When the sensor self-diagnosis is complete, the ECU sends an ID allocation confirmation signal to the sensors.


iv.

After the ID allocation confirmation is performed, the ECU provides power to the second sensors in each series (front left center sensor and rear left center sensor) via the first sensors. In the same manner as the first sensors, the second sensors enter standby mode. When a certain amount of time has elapsed, the ECU sends an ID allocation signal to the second sensors.


v.

The above operation will be repeated until an ID is allocated to the last sensor (front right sensor or rear right sensor). Initialization ends when ID allocation to all ultrasonic sensors is completed.



b.

Initialization mode (for Front Side Ultrasonic Sensor and Rear Side Ultrasonic Sensor):

An ID is allocated to each sensor and sensor diagnosis is performed.

E339259E01
1.979,0.646 2.146,0.646 2.146,0.646 2.396,1.031 false 2.094,2.896 2.26,2.896 2.26,2.896 2.438,2.406 false 2.75,0.969 2.75,0.365 2.75,0.365 2.979,0.365 false 5.094,1 5.302,0.573 5.302,0.573 5.479,0.573 false 5.094,2.396 5.302,2.875 5.302,2.875 5.479,2.875 false 0.479,0.531 2.094,0.844 1.615,0.313 10 false Front Right Side Sensor 3.031,0.281 5.354,0.594 2.323,0.313 10 false Clearance Warning ECU Assembly 0.667,2.781 2.229,3.073 1.563,0.292 10 false Front Left Side Sensor 5.563,2.771 7.01,3.052 1.448,0.281 10 false Rear Left Side Sensor 5.542,0.469 7.115,0.771 1.573,0.302 10 false Rear Right Side Sensor 0.156,0.125 1.771,0.438 1.615,0.313 12 false for LHD: 0.906,1.604 1.333,1.854 0.427,0.25 10 false Front

E339258E01
1.708,0.792 1.896,0.792 1.896,0.792 2.146,1.208 false 1.667,3.094 1.854,3.094 1.854,3.094 2.146,2.594 false 5.01,1.208 5.115,0.813 5.115,0.813 5.281,0.813 false 5.021,2.604 5.24,3.094 5.24,3.094 5.448,3.094 false 2.792,0.552 2.573,0.552 2.573,0.552 2.573,2.427 false 0.188,0.688 1.792,0.958 1.604,0.271 10 false Front Right Side Sensor 0.25,2.979 1.854,3.25 1.604,0.271 10 false Front Left Side Sensor 0.656,1.802 1.177,2.073 0.521,0.271 10 false Front 5.333,0.708 6.854,1 1.521,0.292 10 false Rear Right Side Sensor 5.521,3 7,3.26 1.479,0.26 10 false Rear Left Side Sensor 0.146,0.135 1.052,0.396 0.906,0.26 12 false for RHD: 2.833,0.458 5.302,0.708 2.469,0.25 10 false Clearance Warning ECU Assembly

i.

When the initial check is operating (the power switch is on (IG) and the TOYOTA parking assist-sensor system is on), the clearance warning ECU assembly provides power to the first sensors in each series (front left side sensor and rear left side sensor).


ii.

After the power is supplied, the front left side sensor and rear left side sensor enter standby mode to receive an ID from the ECU. When a certain amount of time has elapsed, the ECU sends an ID allocation signal to these sensors.


iii.

The front left side sensor and rear left side sensors receive the ID allocation signal from the ECU and perform self-diagnosis. When the sensor self-diagnosis is complete, the ECU sends an ID allocation confirmation signal to the sensors.


iv.

After the ID allocation confirmation is performed, the ECU provides power to the second sensors in each series (front right side sensor and rear right side sensor) via the first sensors. In the same manner as the first sensors, the second sensors enter standby mode. When a certain amount of time has elapsed, the ECU sends an ID allocation signal to the second sensors. Initialization ends when ID allocation to all ultrasonic sensors is complete.



c.

Detection mode:

After initialization mode is completed, the system switches to detection mode. In detection mode, the clearance warning ECU assembly sends information request signals and sensor activation signals to the ultrasonic sensors and receives detection result signals from the sensors.

i.

The ECU regularly sends ID signals, information request signals, and sensor activation signals to each ultrasonic sensor according to the communication schedule.


ii.

When a certain amount of time has elapsed (sensor detection operation is completed), the ECU sends an ID signal to the sensor to receive a detection result signal.


iii.

The ultrasonic sensor sends a detection result signal or detection information signal to the ECU.


iv.

The above operation is performed repeatedly for each ultrasonic sensor.