Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › SIMPLE INTELLIGENT PARKING ASSIST SYSTEM
RM3210E _56 Audio / Visual / Telematics _047512 PARK ASSIST / MONITORING _0244874 SIMPLE INTELLIGENT PARKING ASSIST SYSTEM U

PARK ASSIST / MONITORING  SIMPLE INTELLIGENT PARKING ASSIST SYSTEM  TERMINALS OF ECU  


CLEARANCE WARNING ECU ASSEMBLY


E220917E15
3.5,0.104 3.896,0.344 0.396,0.24 3.583,0.146 4.5,0.708 0.917,0.563 10 false F26

a.

Disconnect the F26 clearance warning ECU assembly connector.


b.

Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F26-1 (IG) - F26-30 (E) L - W-B IG power source signal Power switch off Below 1 V
Power switch on (IG) 11 to 14 V
F26-30 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.


c.

Reconnect the F26 clearance warning ECU assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F26-29 (ISSW) - F26-30 (E) B - W-B S-IPA switch signal Power switch on (IG), S-IPA switch pressed Below 1 V
Power switch on (IG), S-IPA switch not pressed 9.5 to 14 V

If the result is not as specified, the clearance warning ECU assembly may be malfunctioning.