Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › SIMPLE INTELLIGENT PARKING ASSIST SYSTEM
RM3210E _56 Audio / Visual / Telematics _047512 PARK ASSIST / MONITORING _0244874 SIMPLE INTELLIGENT PARKING ASSIST SYSTEM W

PARK ASSIST / MONITORING  SIMPLE INTELLIGENT PARKING ASSIST SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE SIMPLE INTELLIGENT PARKING ASSIST SYSTEM


a.

Customizing with the GTS.

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the TOYOTA parking assist-sensor system on.


iv.

Turn the GTS on.


v.

Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Utility / Customize Setting.


vi.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
IPA Avoidance Distance Simple intelligent parking assist avoidance distance setting Standard 00:Short,01:Standard,10:Long,11:Max Clearance warning ECU assembly
IPA Perpendicular Parking Control Area Simple intelligent parking assist perpendicular parking range setting Middle 00:Small,01:Middle,10:Large,11:Max Clearance warning ECU assembly
IPA Parallel Parking Control Area Simple intelligent parking assist parallel parking range setting Middle 00:Small,01:Middle,10:Large,11:Max Clearance warning ECU assembly
50006 98