INITIALIZATION
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected.
CHARGING SYSTEM PRECAUTION
Orange wire harnesses and connectors indicate high-voltage circuits. To prevent electric shock, always follow the procedure described in the repair manual.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
To prevent electric shock, wear insulated gloves when working on wire harnesses and components of the high voltage system.
If the auxiliary battery is fully depleted or the READY indicator does not illuminate, recharge the auxiliary battery.
Never disconnect the auxiliary battery while the power switch is on (READY).
Before giving the auxiliary battery a quick charge, disconnect the auxiliary battery cables.
Check the auxiliary battery again before the vehicle is returned to the customer.
When replacing the auxiliary battery, use a new auxiliary battery of the same dimensions with a capacity of 51 Ah or more at a 20-hour rate.