Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER
RM3210E _59 Vehicle Exterior _047514 WIPER / WASHER _0244886 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  REPLACEMENT  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.


HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 85222A 1.REMOVE FRONT WIPER BLADE

a.
E337205C01
1.365,1.573 1.625,1.063 true 1.271,1.583 1.583,1.781 0.313,0.198 10 false *a
*a Lock Button
V100135

Push
V113147

Remove in this Direction


Push the lock button of the front wiper blade to release the lock.


b.

Remove the front wiper blade from the front wiper arm as shown in the illustration.

NOTICE:

Place a piece of cloth between the front wiper arm and windshield glass to avoid damaging the windshield glass.



Hide 85214B 2.REMOVE WIPER RUBBER

HINT:

The wiper rubber can be removed from either end of the front wiper blade.


a.

Gradually slide the wiper rubber until the end of the wiper rubber is aligned with the slits in the front wiper blade as shown in the illustration.

E337520C02
5.281,1.083 5.917,0.719 true 5.938,0.594 6.25,0.792 0.313,0.198 10 false *a
*a Slit - -



b.
E337522C02
1.875,0.802 2.781,0.365 true 2.802,0.24 3.115,0.438 0.313,0.198 10 false *a
*a Slit
V113147

Remove in this Direction


Pull the end of the wiper rubber through the slits in the front wiper blade in the direction indicated by the arrow shown in the illustration and remove the wiper rubber.


Hide 85214B 3.INSTALL WIPER RUBBER

HINT:

The wiper rubber can be installed through either end of the front wiper blade.


a.
E331286C01
1.865,0.875 2.729,0.479 true 2.76,0.365 3.073,0.563 0.313,0.198 10 false *a
*a Slit
V113147

Install in this Direction


Insert the wiper rubber through the slit in the front wiper blade as shown in the illustration.


b.

Gradually slide the wiper rubber until the end of the wiper rubber is aligned with the slits in the front wiper blade as shown in the illustration.

E337521C02
5.271,0.896 5.917,0.583 true 5.938,0.469 6.25,0.667 0.313,0.198 10 false *a
*a Slit - -



c.
E337523

Slide the wiper rubber in the direction indicated by the arrow shown in the illustration to install it.


Hide 85222A 4.INSTALL FRONT WIPER BLADE

a.

Insert the protrusion of the front wiper arm into the groove of the front wiper blade in the direction indicated by the arrow (1) shown in the illustration.

E337206C01
1.313,0.906 1.969,0.458 true 1.313,1.844 1.896,1.625 true 5.844,1.813 5.979,1.24 true 1.99,0.323 2.302,0.521 0.313,0.198 10 false *a 1.917,1.5 2.229,1.698 0.313,0.198 10 false *b 5.771,1.823 6.083,2.021 0.313,0.198 10 false *c
*a Protrusion of Front Wiper Arm *b Groove of Front Wiper Blade
*c Lock Button - -
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)



b.

Slide the front wiper blade in the direction indicated by the arrow (2) shown in the illustration until the lock button locks to install the front wiper blade.

NOTICE:

Make sure that the lock button locks so that it is installed securely.