Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM
RM3210E _58 Vehicle Interior _047531 LIGHTING (INT) _0244928 LIGHTING SYSTEM W

LIGHTING (INT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LIGHTING SYSTEM (INT)


a.

Customizing using the GTS.

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Illuminated Entry.


v.

Select the setting by referring to the table below.

Illuminated Entry
Tester Display Description Default Setting ECU
Lighting Time Changes the lighting time of the following lights that are operated by the timer function when the interior light DOOR switch of the map light assembly is on:
·

Map light assembly

·

No. 1 room light assembly


15 s 10:30 s,00:15 s,01:7.5 s Main body ECU (Multiplex network body ECU)
I/L when ACC OFF Turns off the following lights automatically when the interior light DOOR switch of the map light assembly is on and the power switch is turned from ON or ACC to off:
·

Map light assembly

·

No. 1 room light assembly


ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
I/L ON W/Door Key Unlock Lights up the following lights automatically when the interior light DOOR switch of the map light assembly is on and the doors are unlocked by an unlock operation:
·

Map light assembly

·

No. 1 room light assembly


ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Room Light when Aprchd Lights up the following lights when the interior light DOOR switch of the map light assembly is on and the electrical key transmitter sub-assembly is brought near the vehicle:
·

Map light assembly

·

No. 1 room light assembly


ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)*
Inside Foot Light Turns on the following lights:
·

Footwell Light*


ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Light Control Dims the following lights when the power switch is on (IG) and the shift lever is moved to any position other than P:
·

Footwell Light*


ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Interior Light Control Lights up the following lights:
·

Map light assembly

·

No. 1 room light assembly


ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 6

*: w/ Footwell Light




b.

Customizing with the multi-display (w/ multi-display)

i.

Turn the power switch on (IG).


ii.

Enter the following menus:

·

Type A: APPS / Setup / Vehicle / Vehicle customization / Lights settings.

·

Type B: MENU / Edit/settings / System / Vehicle settings / Vehicle customization / Lights settings.

·

Type C: SETUP / Vehicle / Vehicle customization / Lights settings.

·

Type D: MENU / Setup / Vehicle / Vehicle customization / Lights settings.



iii.

Select the setting by referring to the table below.

Lights settings
Display Content Default Setting Relevant ECU
Interior light off timer Changes the lighting time of the following lights that are operated by the timer function when the interior light DOOR switch of the map light assembly is on:
·

Map light assembly

·

No. 1 room light assembly


15 sec. Off, 15 sec., 7.5 sec. or 30 sec. Main body ECU (Multiplex network body ECU)



c.

Customizing with the multi-information display (combination meter assembly (meter circuit plate)) (w/o multi-display)

i.

Turn the power switch on (IG).


ii.

Select the setting tab in the multi-information display.


iii.

Enter the following menus: Vehicle settings / Lights settings.


iv.

Select the setting by referring to the table below.

Lights settings
Display Content Default Setting Relevant ECU
Interior light off timer Changes the lighting time of the following lights that are operated by the timer function when the interior light DOOR switch of the map light assembly is on:
·

Map light assembly

·

No. 1 room light assembly


15 sec. Off, 15 sec., 7.5 sec. or 30 sec. Main body ECU (Multiplex network body ECU)