Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type)
RM3210E _56 Audio / Visual / Telematics _047511 NAVIGATION / MULTI INFO DISPLAY _0245074 NAVIGATION SYSTEM(for Navigation Receiver Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  U0073  Sending Malfunction (Navigation to APGS)  U0100  Engine ECU Communication  U0129  VSC(ECB)ECU Communication  U0140  Lost Communication with Body Control Module  U0155  Meter ECU Communication  U0164  Air Conditioner ECU Communication  U0293  HV ECU Communication  U1110  Clearance Sonar ECU Communication  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Sending Malfunction (Navigation to APGS) CAN bus connection error CAN communication system
U0100 Engine ECU Communication CAN reception error CAN communication system
U0129 VSC(ECB)ECU Communication CAN reception error CAN communication system
U0140 Lost Communication with Body Control Module CAN reception error CAN communication system
U0155 Meter ECU Communication CAN reception error CAN communication system
U0164 Air Conditioner ECU Communication CAN reception error CAN communication system
U0293 HV ECU Communication CAN reception error CAN communication system
U1110 Clearance Sonar ECU Communication CAN reception error CAN communication system

PROCEDURE

1.CHECK DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Navigation Receiver Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

NG