Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER SYSTEM
RM3210E _59 Vehicle Exterior _047515 WINDOW / GLASS _0245125 WINDOW DEFOGGER SYSTEM U

WINDOW / GLASS  WINDOW DEFOGGER SYSTEM  TERMINALS OF ECU  


CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


B429611N02
2.25,0.417 2.667,0.667 0.417,0.25 3.833,0.417 4.25,0.667 0.417,0.25 5.208,0.167 5.625,0.417 0.417,0.25 5.354,0.229 5.667,0.427 0.313,0.198 10 false z1 2.354,0.479 2.667,0.677 0.313,0.198 10 false F57 3.938,0.469 4.25,0.667 0.313,0.198 10 false F58

a.

Disconnect the F58 air conditioning amplifier assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F58-2 (IG+) - F58-4 (GND) B - W-B Power source (IG) Power switch on (IG) 11 to 14 V
F58-2 (IG+) - F58-4 (GND) B - W-B Power source (IG) Power switch off Below 1 V
F58-1 (B) - F58-4 (GND) V - W-B Auxiliary battery power supply Power switch off 11 to 14 V
F58-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the F58 air conditioning amplifier assembly connector.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F58-5 (RDFG) - F58-4 (GND) W - W-B Rear window defogger signal Power switch on (IG), rear window defogger switch off 11 to 14 V
F58-5 (RDFG) - F58-4 (GND) W - W-B Rear window defogger signal Power switch on (IG), rear window defogger switch on Below 1 V
F58-14 (LIN1) - F58-4 (GND) BE - W-B LIN communication line Power switch on (IG) Pulse generation



CHECK AIR CONDITIONING CONTROL ASSEMBLY


B440784N01
3.406,0.146 3.813,0.396 0.406,0.25 3.479,0.198 3.938,0.396 0.458,0.198 10 false F52

a.

Disconnect the F52 air conditioning control assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F52-8 (IG+) - F52-1 (GND) LG - W-B Power source (IG) Power switch on (IG) 11 to 14 V
F52-8 (IG+) - F52-1 (GND) LG - W-B Power source (IG) Power switch off Below 1 V
F52-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the F52 air conditioning control assembly connector.


d.

Check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F52-6 (LIN1) - F52-1 (GND) BE - W-B LIN communication line Power switch on (IG) Pulse generation