Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM3210E _59 Vehicle Exterior _047515 WINDOW / GLASS _0245126 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1.REPAIR BACK DOOR GLASS (REAR WINDOW DEFOGGER WIRE)

B106758C14
1.052,0.573 0.5,1.083 0.5,1.083 1.104,1.01 false 1.729,0.917 1.729,1.313 false 2.833,0.833 2.833,1.063 false 1.635,1.333 1.844,1.563 0.208,0.229 10 *c 0.365,1.115 0.573,1.323 0.208,0.208 10 *a 2.76,1.063 2.979,1.271 0.219,0.208 10 *b
*a Masking Tape
*b Broken Wire
*c Repair Point


a.

Clean the broken wire tips with a grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.
B106759

Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).


d.

Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not use the rear window defogger for at least 24 hours after performing the repair.