PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
After the power switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal.
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the terminal is reconnected.
PRECAUTION FOR AUDIO AND VISUAL SYSTEM
If replacing any of the following parts, refer to Initialization of Repair Instruction.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
Telematics transceiver*
*: w/ Manual (SOS) Switch