2005-2008 RAV4 · Service Manual BRAKE

FAIL-SAFE CHART

System information · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


FAIL SAFE OPERATION
  1. If there is a problem with any sensor signals or actuator systems, the skid control ECU prohibits the power supply to the brake actuator.
    ABS control is prohibited, but EBD control continues as long as possible. If EBD control is impossible, the BRAKE warning light comes on to warn the driver (Click here).
  2. If system components have any malfunctions before starting control, the operation stops immediately. If system components have any malfunctions during control, the control stops gradually so as not to trigger a sudden change in vehicle conditions.
    If it is impossible to control the systems, the warning light comes on to inform the driver of malfunctions in the systems (Click here).

HINT:
  1. If the ABS system malfunctions, the brake system operates normally without the ABS system.
  2. If the brake actuator malfunctions, a gradual loss of brake performance is expected, and ABS system control is prohibited.

ABS and EBD system 
Malfunction Area
Fail-Safe Operation
ABS system
ABS control prohibited
EBD system
ABS and EBD control prohibited
← FREEZE FRAME DATA (from Nov 2005)FAIL-SAFE CHART (Jan 2007 – Jul 2007) →