C0226/21 SFR Solenoid Circuit
Diagnostic trouble codes · Vehicles built Jan 2007 – Jul 2007
Also covers:
- C0236/22 SFL Solenoid Circuit
- C0246/23 SRR Solenoid Circuit
- C0256/24 SRL Solenoid Circuit
- C1225/25 SM Solenoid Circuit
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008
DESCRIPTION
This solenoid is turned on in accordance with signals from the skid control ECU and controls the pressure on the wheel cylinders to control the braking force.The solenoid and solenoid relay are built into the ABS and TRACTION actuator.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| C0226/21 C0236/22 C0246/23 C0256/24 |
Open or short in solenoid circuit continues for 0.05 seconds or more. |
ABS and TRACTION actuator |
| C1225/25 |
When one of following conditions is met:
|
ABS and TRACTION actuator |
- HINT:
- DTCs C0226/21, C0236/22, C0246/23, C0256/24 and C1225/25:
- The skid control ECU begins to detect these DTCs when the vehicle speed exceeds 6 km/h (4 mph).
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. RECONFIRM DTC |
Clear the DTC(s) (Click here).
Start the engine.
Drive the vehicle at 6 km/h (4 mph) or more to activate the initial check.
Check if the same DTC(s) is output (Click here).
Result Result
Proceed to
DTC is output
A
DTC is not output
B
- HINT:
- The DTCs may be stored due to a malfunction in the connector terminal.
|
|
||||
| A | ||
| ||
