2005-2008 RAV4 · Service Manual ENGINE

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007

HINT:
Intelligent tester:
Inspect the vehicle's ECM using check mode. It is easier to detect intermittent problems when the ECM is in check mode with the intelligent tester. In check mode, the ECM uses 1 trip detection logic, which has a higher sensitivity to malfunctions than normal mode (default). Normal mode uses 2 trip detection logic.

  1. Change the ECM from normal mode to check mode using the intelligent tester (Click here).
  2. Perform a simulation test (Click here).
  3. Check the connector and terminal (Click here).
  4. Wiggle the harness and the connector (Click here).
← HOW TO PROCEED WITH TROUBLESHOOTING (from Jan 2007)CHECK FOR INTERMITTENT PROBLEMS (Jan 2007 – Jul 2007) →