2005-2008 RAV4 · Service Manual STEERING

INSTALLATION

Removal / installation · Vehicles built Jan 2007 – Jul 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. INSTALL POWER STEERING ECU

  1. C158026E01
    Check that the connector lever is the fully unlocked position before installation.

    NOTICE:
    If the lever has been lifted out of the fully unlocked position, it may cause an imperfect connection.

  1. C128907E04
    Install the ECU with the 3 nuts.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

  1. Connect the 4 connectors.

  1. Lock the connector lever.

  1. Lightly pull on the connector and check that the connector will not be disconnected.


2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY UPPER
  1. Install the instrument panel (Click here).


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSTALLATION (Nov 2005 – Dec 2006)INSTALLATION (from Aug 2007) →