ON-VEHICLE INSPECTION
Inspection · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).

With the driver side knee airbag installed on the vehicle, perform a visual check:
- Check for cuts, cracks or discoloration on the steering pad outer surface and in the grooved portion.
- If any of the defects mentioned above are present, replace the driver side knee airbag with a new one.
- CAUTION:
- For removal and installation of the driver side knee airbag, be sure to follow the correct procedure.
- Check for cuts, cracks or discoloration on the steering pad outer surface and in the grooved portion.
| CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).

With the driver side knee airbag removed from the vehicle, perform a visual check:
- Check for cuts, cracks or discoloration on the driver side knee airbag outer surface and in the grooved portion.
- Check for cuts and cracks in the wire harness, and chipping on the connectors.
- Check for deformation on the driver side knee airbag.
- If any of the defects mentioned above are present, replace the driver side knee airbag with a new one.
- CAUTION:
- For removal and installation of the driver side knee airbag, be sure to follow the correct procedure.
- Check for cuts, cracks or discoloration on the driver side knee airbag outer surface and in the grooved portion.
