2005-2008 RAV4 · Service Manual CRUISE CONTROL SYSTEM

TC and CG Terminal Circuit

Circuit diagnosis · Vehicles built Nov 2005 – Jul 2007

Versions by build date: Nov 2005 – Jul 2007 from Aug 2007

DESCRIPTION

Connecting terminals 13 (TC) and 4 (CG) of the DLC3 enables DTCs to be read through blinking patterns of the combination meter's CRUISE main indicator light.

HINT:
When a warning light of the combination meter blinks continuously, terminal 13 (TC) of the DLC3 or an ECM may have a ground short.


WIRING DIAGRAM

E110507E03

INSPECTION PROCEDURE


1. CHECK WIRE HARNESS (DLC3 - ECM AND BODY GROUND)
E125994E02
  1. Disconnect the E16 DLC3 connector.

  1. Disconnect the A12 ECM connector.

  1. Measure the resistance of the wire harness side connectors.

    Standard resistance:
    for 1AZ-FE, 2AZ-FE 
    Tester Connection
    Specified Condition
    E16-13 (TC) - A12-27 (TC)
    Below 1 Ω
    E16-4 (CG) - Body ground

    for 2AD-FTV, 2AD-FHV:
    Tester Connection
    Specified Condition
    E16-13 (TC) - A12-26 (TC)
    Below 1 Ω
    E16-4 (CG) - Body ground

    HINT:
    *1: for 1AZ-FE, 2AZ-FE
    *2: for 2AD-FTV, 2AD-FHV



NG
REPAIR OR REPLACE HARNESS AND CONNECTOR
OK

REPLACE ECM


← Cruise Control Switch Circuit (from Aug 2007)TC and CG Terminal Circuit (from Aug 2007) →