INSPECTION
Inspection · Vehicles built from Aug 2007
| INSPECT MASS AIR FLOW METER |
 |
- Perform a visual check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter shown in the illustration.
- OK:
- There is no foreign matter.
If the result is not as specified, replace the mass air flow meter.
- Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 (THA) - 2 (E2)
|
-20°C (-4°F)
|
13.6 to 18.4 kΩ
|
1 (THA) - 2 (E2)
|
20°C (68°F)
|
2.21 to 2.69 kΩ
|
1 (THA) - 2 (E2)
|
60°C (140°F)
|
0.49 to 0.67 kΩ
|
If the result is not as specified, replace the mass air flow meter.