INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY (for LHD) |
![]() ![]() |
Check operation of the lumbar support adjuster.
Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.
- OK:
Measurement Condition
Operation Direction
Battery positive (+) → 1 (H)
Battery negative (-) → 2 (R)
Clockwise
Battery positive (+) → 2 (R)
Battery negative (-) → 1 (H)
Counterclockwise
| REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for RHD) |
![]() ![]() |
Check operation of the lumbar support adjuster.
Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.
- OK:
Measurement Condition
Operation Direction
Battery positive (+) → 1 (R)
Battery negative (-) → 2 (H)
Clockwise
Battery positive (+) → 2 (H)
Battery negative (-) → 1 (R)
Counterclockwise



